DeTomaso Mailing List: October 97, Message #100
     



From: 	DtomasoCat@aol.com

Subject: Re: More clutch woes

Date: 	Sun, 5 Oct 1997 10:19:05 +0000



Charlie,



I had this problem when I replaced my clutch master cylinder and slave

cylinder.  I had a difficult time bleeding the system of all the air.  The

only really good way to do it is to use a Vacuum pump at the slave cylinder

and pull all the fluid through the system.  I then went back and pumped the

clutch and bled it some more.  I di this for about 1/2 hour and pulled all my

old fluid out of the lines.  When I was done my clutch worked great and has

stayed "air free" since.



Hope this helps!



Jim Demick