DeTomaso Mailing List: August 98, Message #225

[previous topic] [index] [next topic]
From: Dan Jones <djones2@mdc.com>
Subject:aussie 2v closed chamber heads - Reply
Date: Thu, 6 Aug 1998 16:32:56 +0000

William,

Congrats.  What are your plans for the heads?  I got a chance to drive
my Aussie headed motor this weekend and like it alot.  I did run into one
problem though.  One of the heads had an extra accessory bolt hole drilled
into it.  It looks like it was a manufacturing screw up.  Unfortunately,
the hole was drilled into the water jacket.  I had previously plugged it
with a Teflon tape wrapped bolt but it started leaking.  I'll try the red/brown
Permatex this weekend.

Later,
Dan Jones

>>> William King <wpk@fc.net> 08/06 11:16 am >>>
Folks,

Guess what turned up at the door today ... yup, a pair of
closed chamber aussie 2v heads from Mike Fielder. Still
waiting on the block, which is apparently at sea ... don't
know the depth <grin>. I'll report in when I have more info.

-W
[previous topic] [index] [next topic]