DeTomaso Mailing List: October 98, Message #84
![[previous topic]](../images/prev_topic.gif)
![[index]](../images/index.gif)
![[next topic]](../images/next_topic.gif)
| From: | ScruffyDi@aol.com |
| Subject: | Re: Help! Wheel alignment (Additional Info) |
| Date: | Fri, 2 Oct 1998 15:16:00 +0000 |
Hi All,
Just a general note on wheel alignment. It is best to get both fronts as close
as possible together, and the same with both rears. By that I mean, since
there is always a tolerence, if one front is dead on, make the other front as
close as you can to dead on. If one front is at the plus end of the tolerence,
make the other front at the plus end and not the minus end. In other words if
the front numbers were 1/4" plus or minus 1/8". Do not make one front the
plus, which would be 3/8" and the other front the minus, which would be 1/8".
Another short story made long by the Scruffy one.
Past owner of #6439
Peace