DeTomaso Mailing List: July 99, Message #7

Yes Tomas, mine had arrows also the ones on the male end of the axle
were very faint but after a good cleaning they were very apparent
(arrows on the male end look like this -->, and on the female end like
this ==>).  Happy hunting Rick. 

Tomas Gunnarsson wrote:
> 
> Date:  07/02/1999  09:01 am  (Friday)
> From:  Tomas Gunnarsson
> To:  "detomaso@realbig.com"@michq.tfs,  "SE
>      :marytaphorn@email.msn.com"@michq.tfs
> Subject:  Re: half shafts
> 
> My driveshafts have these markings too! Following them you end up with the yokes oriented the same.
> 
> Tomas
> 
> >>> "marytaphorn@email.msn.com" 07/02 8:04 am >>>
> It has been awhile since a rebuilt my halfshafts, But I recall stamped
> arrows on the two halves that guided reassembly.  Anyone back this up?
> 
> John T
> -----Original Message-----
> From: moseleyaÉpacbell.net <moseleyaÉpacbell.net>
> To: Multiple recipients of list <detomasoÉrealbig.com>
> Date: Thursday, July 01, 1999 3:54 PM
> Subject: half shafts
> 
> >Subject of the day.....   Half-shafts and orientation
> >
> >(Actually the Drewmeister was told the Pantera has
> >Driveshafts, not half-shafts... but I'll let him explain
> >that one....)
> >
> >Printed a bunch of the past threads on this recently and
> >scanned them for my answer. But we got off on CV joints....
> >Will read more closely tonight to see if my answer is in
> >there.
> >
> >What is the proper orientation of the center shaft yokes?
> >One of mine is put together with the yokes on the center
> >shaft in the same orientation, the other is put together
> >with yokes perpendicular to each other (90degrees out).
> >The guys doing my rebuilds just called and asked for how I
> >wanted them, which should they change??
> >
> >Thanks in advance
> >
> >Rick
> >#6653
> >
> >
> 
>