DeTomaso Mailing List: October 99, Message #134

[previous topic] [index] [next topic]
From: daniels_ken@burr-brown.com
Subject:RE: Rack & Pinion
Date: Mon, 4 Oct 1999 14:51:32 -0400

Careful on the brass bushing.  I recieved one from one of the usual
vendors.  When the bushing was installed and snugged up with the set screw,
the rack would not move.  After much fustration, with micrometer in hand
noticed that the bushing was smaller in OD than the area adjacent to the
old plastic bushing.  What they had done was to cut the bushing to replace
the plastic bushing and reuse the old setscrew.  Everything works fine now.

Slopoke
[previous topic] [index] [next topic]