DeTomaso Mailing List: November 99, Message #299

Hey Gang

Could use your insight.  Recently learned that my brake lights are not
functioning.  Performed the following tests:

Tested the stop light switch on the junction box under the master cylinder -
It works

Ran a jumper wire from the battery to the lead off the stop light switch
that runs to the taillights. - Rear brake lights lighted.  No problem there.

I then connected a voltmeter to the hot lead that runs into the stop light
switch.  - Of course no voltage.

When the ignition switch is turned to the second click - I get ~ 5 volts
Turn the key and start the car - I get no volts.

Seems the problem is in the ignition interlock switch.

Is this repairable?  Or is a new ignition switch required?  Any other
diagnoses?

Thanks
John T