DeTomaso Mailing List: March 2000, Message #117

Got the lift out!
Intact (with motor still attached to bracket).
Armature in straight position, fed arm through lower (larger) bottom cut-out, 
rotated whole set-up 90 degrees counterclockwise, pulled door handle linkage 
out of way, slipped right out.

SHOULD I USE A SILICONE GREASE (SPRAY) OR WHITE LITHIUM GREASE?
THANKS TO ALL!
In a message dated 3/3/00 7:44:08 PM Eastern Standard Time, Tipo874 writes:

> Clean all the old grease out  of the gear holder and pack it with a high-
> quality silicone grease.  It should last forever or until you get totally 
fed 
> up with Italian engineering and sell it.  Happy Motoring!  
>                                                                             
  
>      Bob R.  Tipo874@aol.com