DeTomaso Mailing List: April 2001, Message #98

FWIW, I have replaced all 16 of my bushings using Craftsman sockets and a
vice to drive the shells out.  Also used (carefully) a sawzall to cut the
flanges off and weaken the the shell axially.  You can do it my way, in a
pinch, with some care.


----- Original Message -----
From: "Bruce Maddox" <maddoxbr@pacbell.net>
To: "Multiple recipients of list" <detomaso@realbig.com>
Sent: Tuesday, April 03, 2001 4:02 PM
Subject: A-Arm Bushing Press Tool


> Does anyone have the A-Arm Bushing press tool that consists of the
> Pilot/Driver and A-Arm Support.  It's the one shown on Mike Dailey's web
> site made by Fred Terry.
>
> Does anyone what to sell (new or used) or loan out the tools?
>
> I will be trying to remove the outer metal sleeves short and sure could
> use the tool.  I don't want to scare up the inside of the A-Arm sleeves.
>
> Thanks,
>
> Bruce Maddox
>
>