[DeTomaso] Pantera Brake Kight Switch

[JDeRyke at aol.com]

In a message dated 10/3/04 04:35:12 PM, ihannington286720mi at comcast.net 
writes:

<< I picked one of those (VW brake swithc) up from NAPA yesterday, it was too 
small to thread into the stock shuttle valve.  It appeared that the stock 
switch has a 1/4''

pipe thread while part #SL147 has an 1/8'' tube thread. >>

Correct; I also found (the hard way) years ago the VW switch was erroneously 
listed somewhere as fitting the Pantera. Not only is the thread wrong, the 
connector is round rather than a blade connector so the rest of you- it would be 
easier to adapt almost any other switch than this one. Cheers- J DeRyke