[DeTomaso] Pulling ZF

[John Taphorn]

No, I would loosen the bolts as much as possible keeping the nuts attached 
to the bolt.  This practice make it easier when reassembling.  Also, with 
the ZF out, replace the studs that hold on the ears with allen head bolts. 
In the future, you will be able to remove the ears and slip the ZF straight 
back without jacking the engine.

JT
----- Original Message ----- 
From: "charles buthala" <charlesbuthala at yahoo.com>
To: <detomaso at realbig.com>
Sent: Tuesday, August 01, 2006 9:12 AM
Subject: [DeTomaso] Pulling ZF


>I know that there was some discussion on pulling the ZF but I can not seem 
>to find them.  In order to clear the two chassis mounting ears do you have 
>to remove the engine mounting bolts entirely?
>
> ---------------------------------
> Groups are talking. We&acute;re listening. Check out the handy changes to 
> Yahoo! Groups.
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at realbig.com
> http://ftl.realbig.com/mailman/listinfo/detomaso
>