[DeTomaso] A/C Removal

[JDeRyke at aol.com]

In a message dated 6/05/06 10:30:32 AM, persocaddy at aol.com writes:

<<  I only have one belt with the idler tension pulley that drives it so the 
Alt. and water pump are on one belt. I will remove the condenser and fan, A/C 
steel heavy mounting bracket, and my Sanyo rotary compressor >>

The alternator is mounted on part of that A/C bracket so the bracket will 
have to stay, but you could cut the idler pulley mount off and later on, use the 
rotary compressor itself to adjust its belt drive. And unless you added them, 
there are no shut-off valves as in the old York compressor, so disconnecting 
the Sankyo will vent the whole system. Good luck at Pocono- J DeRyke