[DeTomaso] Alignment specs

[John Taphorn]

John

I'll offer an opinion based on my experience.  This set up reduces 
understeer and is a good compromise between max handling and less tire wear.

Front wheels:  1/16" toe out; .75 degrees negative camber.  All the caster 
you can get.

Rear Wheels:  3/32" to 1/8" toe in; .5 degrees negative camber.

JT
----- Original Message ----- 
From: "John Maffeo" <johnmaffeo1 at yahoo.com>
To: "mail list Pantera" <detomaso at realbig.com>
Sent: Tuesday, June 13, 2006 12:22 PM
Subject: [DeTomaso] Alignment specs


> I'll be taking my car in for an alignment next week. What specs should I 
> give them.
>
>  My car is a '72 pre-L. I have 17x11 on the rear with 335x35x17 and 16x8.5 
> front with 245X45X16. I have Aldan adjustable shocks, 1" sway bars front 
> and rear with heim joints. I also have a camber lock kit. The car will 
> mosly be driven on the street but will see some track time too.
>
>  Your thoughts?
>
>  thanks in advance,
>
>  John Maffeo
>  #2647
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at realbig.com
> http://ftl.realbig.com/mailman/listinfo/detomaso
>