[DeTomaso] FW: Fellow Pantera Club Members... I have a few items for sale that you may need.

[Mike Becker]

Just passing along this list of parts available from a non-forum, POCA
member Dan Miller.  Contact Dan directly if you see something that
interests you.  Dan is located in the north end of San Diego, CA.
 
 
-----Original Message-----
From: members-bounces at sandiegopanteras.com
[mailto:members-bounces at sandiegopanteras.com] On Behalf Of
danielmmiller at aol.com
Sent: Tuesday, June 27, 2006 6:19 AM
To: members at sandiegopanteras.com
Subject: [SDP] Fellow Pantera Club Members... I have a few items for
sale that you may need.
 
Hello fellow Pantera and classic FORD car enthusiasts.
 
This is Dan Miller.  With San Diego Panteras.  
 
I have a few items that are for sale that you may need, want, or just
simply know someone that needs them and I would appreciate it very much
if you can share this info with whomever you feel might want it.  Both
in San Diego and other areas.  I don't have access to main DeTomaso
forum.  Just this San Diego Club forum.  So if you want to post my info
on the main forum also please feel free to do so.  Many thanks in
advance.
 
We are having a wedding and reception at my home for my step brother and
his fiancee in a few weeks.  I have way too many parts sitting around.
So I need to get things cleaned up and thought I might offer them for
sale to whomever might be interested.  
 
Here it goes:
 
351C motor (73 or 74).  Complete.  Oil pan to intake.  2V heads.  Was
running when pulled from vehicle. $300 OBO.
 
351C motor.  (71 or 72) all apart.  4 bolt main block.  Crank, rods,
pistons, etc.  Standard bore.  Needs rebuild. $475 OBO.
 
351C 4V closed chamber/quench heads.  Pair.  Good shape.  Probably can
just bolt on and use.  $500 OBO.
 
351C Edelbrock Performer Intake Manifold. Polished.  $200 OBO.
 
67-68 289 V8 motor.  Complete oil pan to intake.  Stock build.  About
35K on rebuild.  Ran great when pulled from car.  Sitting on engine
stand.  Was pulled from Mustang to make way for 347 stroker motor.
Don't need.  $550 OBO.
 
T45 5 speed trans (late 90's) with shifter, arm, ball, and bell housing.
Good shape.  $300 OBO.
 
Early T5  5 speed trans (late 80's).  No bell housing.  No shifter.
Good shape.  $250 OBO.
 
Original front fenders for 68 Mustang.  Usable original parts.  Need
some work and paint, etc. but very usable.  $50 for pair.  I pulled them
from another project car and put new fiberglas fenders on with 3 1/4
inch flares.  Don't need these original parts.
 
Mid 70's 351W block.  Rough bored for .030 over.  Needs finish
machining.  I bought it to use as a base for a project car motor.  But
found a complete engine to use instead.  So sitting in garage.  Don't
need.  Asking what I paid. $175.  
 
69 351W stock iron heads.  Need work.  $50 for pair. 
 
67 mustang drivers rear quarter.  New.  Never used.  Bought both sides
for a project car.  Ended up not needing it.  Will let go for $150.
Think I paid nearly double.  
 
Two FMX auto trans with converters.  Came out of 69/70 mustangs.  Both
were working great when pulled.  I changed those cars over to manual
transmissions.  So no need for the trans.  $100 each.
 
C4 auto trans with converter.  Was pulled from a 67 mustang.  Ran ok
when pulled.  $150.
 
Brand new rebuilt 350 chevy motor short block.  4 bolt mains.  .020 over
bore.  Zero miles.  Stock build.  Still on engine stand.  Was going to
use in Suburban.  Decided not to keep vehicle and sold it.  Don't need
the motor.  $450 obo.
 
New rebuilt heads for chevy 350 motor.  All ready to bolt on and use.
Zero miles.  Never bolted on.  $350 obo for the pair.
 
4 speed automatic overdrive trans for chevy.  700R4.  Ran when pulled
from vehicle.  $350 obo.
 
1967 Ford Fairlane Convertible.  Project car.  No engine or trans.  8
inch rear end.  Was small block 289 with auto trans car.  Has console.
Most other parts there.  Needs body work and paint.  Needs suspension
rebuild.  Needs new top but other top pieces there.  Glass good. Chrome
OK.  Some rust.  Have replacement panels and misc parts.  Have many
parts that go with it.  Can be seen at CID Autobody 458 Quince Street,
Escondido CA 92025.  Have about $1100 into it with parts I bought and so
on.  Too many projects.  Not enough time or money.  Will be very cool
car to finish.  Will let go for $650 obo.
 
1967 Ford Mustang Coupe.  Restomod.  fully balanced 347 Stroker motor,
Edelbrock aluminum RPM heads, RPM intake, Holley Projection throttle
body fuel injection, K&N filter.  Milodon deep sump oil pan.  Aggressive
hydraulic roller cam, electronic ignition, aluminum radiator, chromed
100 amp alternator, JBA shorty headers with 2 1/2 aluminized exhaust and
flow masters.  5 speed manual trans with Hurst shifter and Ball.
Hydraulic clutch system (JMC/CNC) King Cobra clutch and high end
throwout.  Lightened flywheel.  All new suspension shocks, springs, etc,
including tubular A-Arms.  Shelby mods.  New brakes all around.  8 inch
rear end.  Front and rear sway bars. New heavy duty U-joints and
balanced drive shaft. New gas tank with new fuel lines and return.
Electric fuel pump.  Newer custom paint (midnight blue with white racing
stripes).  Newer chrome all around. Locking gas cap. New front and rear
windshields. New custom interior (headliner, carpet, seats, kick panels,
door panels, etc) with custom covered aftermarket front bucket seats.
Including trunk totally finished off.  Battery with box in trunk.  Newer
Magnum 500 wheels and new tires all around.  Car is lowered and looks
very nice.  Aggressive.  Sounds and runs great.  Draws a lot of
attention at cruise night.  Car has more than $27K into it between last
two owners with all upgrades, parts, custom work, etc.  Sacrifice for
$8950 OBO.
 
Contact:  Dan Miller 1941 Sorrentino Drive, Escondido CA 92025.
760-739-8241 home phone.  Or... since I have a teenage daughter... Cell
760-443-7652.  danielmmiller at aol.com 
 
Have a great week all.  Thanks.
 
Dan Miller.