[DeTomaso] Hehehe....

[John Bentley (jab)]

I thought we also agreed on heavy weapons, Brazilian girls, and driving
fast?
 
JB
 
 

________________________________

From: Mad Dog Antenucci [mailto:teampantera at yahoo.com] 
Sent: Tuesday, February 28, 2006 5:50 PM
To: John Bentley (jab); LiTtOFreAkYDeViL at aol.com; detomaso at realbig.com
Subject: RE: [DeTomaso] Hehehe....


JB and I don't agree on anything except maybe D*ck's 3-point bars and
his roll cages. hehehe
MD

"John Bentley (jab)" <jab at cisco.com> wrote:

	I'm all for guys that like to do the job themselves, but you
can't beat
	one of D*ck's bars. Save yourself a lot of headache and just buy
one
	from him. They fit perfectly, come with everything you need, are
fairly
	priced, and you can get a removable third leg (which I have and
	recommend) for added safety. You can come check out mine before
you buy
	if you like.
	
	JB - seal of approval
	
	
	
	
	-----Original Message-----
	From: detomaso-bounces at realbig.com
[mailto:detomaso-bounces at realbig.com]
	On Behalf Of Mad Dog Antenucci
	Sent: Tuesday, February 28, 2006 8:38 AM
	To: LiTtOFreAkYDeViL at aol.com; detomaso at realbig.com
	Subject: Re: [DeTomaso] Hehehe....
	
	LARRY HEHEHE,
	
	If you are running the 130 Average Group (165 top speed) and are
	planning to fabricate and install your own roll bar make sure if
you are
	bolting it in you use the existing fire wall bolt holes and on
the base
	that you use a backing plate and you mount the bolts in the 'up'
	position so that Tech can see you 'really' have secured the
bar....a
	couple of the Viper/Corvette/Porsche wieniers in attempting to
NOT have
	to drill holes into their precious factory race cars have
actually
	mocked up the bar, set in the car but never bolted it in or if
the
	bolted it in they never put a backing plate so now Tech wants to
see
	that your mounting base bolts and nuts are visable....again,
check tech
	rules and also check with John Bentley (JB) who isn't that far
from you.
	I know you have a budget and want to do the work yourself but
Dick
	Drenske I think has some roll bars already made up...contact
D*ck if you
	are interested.
	
	MD
	
	LiTtOFreAkYDeViL at aol.com wrote:
	Okay okay mad dawg... thanks for the quick answers :) i'll spend
some
	time 
	reading the SSCC tech rules since i just got done with all these
school
	test 
	and etc... I really hope to get the pantera done on time!!!
	
	A roll bar is just something that goes from one side (like my
side next
	to 
	the door and seat).. up and over my head and down the other side
	(passenger 
	side) right? If that's all that's required.. i'll just bend my
own
	tubing... 
	weld some plates on and bolt it to the car and run in 130 mph
group
	=P...
	
	Oh i just ordered another electric water pump haha.. there goes
another
	500 
	bucks...
	
	And... i got my electric thermostat system... it has a freakin
ECU with 
	it!!! hahaha it even has an ambient temp sensor where it reads
	information of the 
	outside air temp to super super super accurately keep my temp
within 3 
	degrees of whatever "pill" i stick into the thermostat
computer.. like
	those rpm 
	limiter pills... haha no wonder it cost more then my water pump
=P..
	
	Larry
	_______________________________________________
	
	Detomaso Forum Managed by POCA
	
	Archive Search Engine Now Available at
http://www.realbig.com/detomaso/
	
	DeTomaso mailing list
	DeTomaso at realbig.com
	http://ftl.realbig.com/mailman/listinfo/detomaso
	
	_______________________________________________
	
	Detomaso Forum Managed by POCA
	
	Archive Search Engine Now Available at
http://www.realbig.com/detomaso/
	
	DeTomaso mailing list
	DeTomaso at realbig.com
	http://ftl.realbig.com/mailman/listinfo/detomaso
	_______________________________________________
	
	Detomaso Forum Managed by POCA
	
	Archive Search Engine Now Available at
http://www.realbig.com/detomaso/
	
	DeTomaso mailing list
	DeTomaso at realbig.com
	http://ftl.realbig.com/mailman/listinfo/detomaso