[DeTomaso] Asymmetric Suspension Pick Up Points?..

[Göran Malmberg]

In the original factory drawings the A-arm mountin ears is supposed to be welded 
within + - 0,5mm tolerances. Thats nothing that should course any kind of action 
to be made. Many times the ears are bent and should be straightened out for better
A-arm bushing fitment. If using poly-bushings, just turn the ends for a perfect fit. 
If they are off at height level more than 2mm you might do soething about it. Welding 
is perfect. But I put in doubt that you will notice a change while driving the car. And 
the lower rear is not easy to handle with the torch. The lower arms are the moost 
important for jacking forces.

If they are out of allignment X-check the whole car for straightness....

Goran Malmberg