[DeTomaso] MSD installation

[Veloce]

Rick is a frequent reader of this list and will probably respond to your 
question directly. The advantage to Rick's kit is the ease of installation 
and it looks good. Very Professional. In the event that Rick's kit is not 
available those headlight and fan relay circuits are easy to add. I replaced 
the old italian relays inside my 71s relay panel with new relays that were 
smaller. With the additional space I was able to add the additional relays 
inside the relay panel and add the circuits to run inside the original wire 
loom. We have also made smaller relay panels that can fit on the bulkhead 
(like Ricks) and modified the Nissan fuse box (like Bob Timmas) to include 
the additional circuits and relays. If you are going to replace the fuse box 
I would highly recommend Bobs - whatever he charges it is well worth the 
price. Don't ask me how I know!

The Other forest - Forest Majors

----- Original Message ----- 
From: <wdemelo66 at aim.com>
To: <detomaso at realbig.com>
Sent: Sunday, September 03, 2006 8:56 AM
Subject: Fwd: [DeTomaso] MSD installation


> Is the Rick Mosely relay kit still available?
> Will
>
>
> -----Original Message-----
> From: Veloce at adelphia.net
> To: jmontero at fcmat.org; detomaso at realbig.com
> Sent: Sun, 3 Sep 2006 7:50 AM
> Subject: Re: [DeTomaso] MSD installation
>
>
> Joel,
>
> I have installed several of the MSD boxes on the front panel inside the 
> hood behind the battery. We used sheilded twisted pair to run the wires 
> back to the distributor. The tach adapter can be installed under the dash 
> out of sight. Makes for a clean professional looking installation. On 
> several of the cars we have installed the MSD box and the Rick Mosley 
> relay kit on the same panel. The box stays cool, protected from the 
> elements and looks right under the relay kit.
>
> The Other Forest - Forest Majors
>
> ----- Original Message ----- From: "Joel Montero" <jmontero at fcmat.org>
> To: "Pantera Group" <detomaso at realbig.com>
> Sent: Saturday, September 02, 2006 5:48 PM
> Subject: [DeTomaso] MSD installation
>
>> I've just purchased the components to convert my ignition using the MSD
>> 6AL box, tach adapter and one of those compact coils. Can anyone send
>> me a picture of a nice, clean installation? I'm just looking for ideas
>> regarding mounting locations and set ups others might have used. Seems
>> to me I saw a few in Monterey this year but didn't have my camera with
>> me.
>>
>>
>>
>> Thanks in advance.
>>
>>
>>
>> Joel
>>
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at realbig.com
>> http://ftl.realbig.com/mailman/listinfo/detomaso
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at realbig.com
> http://ftl.realbig.com/mailman/listinfo/detomaso
> ________________________________________________________________________
> Check Out the new free AIM(R) Mail -- 2 GB of storage and industry-leading 
> spam and email virus protection.
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at realbig.com
> http://ftl.realbig.com/mailman/listinfo/detomaso